TP-LINK TL-WA801ND V1 User's Guide download pdf (Page 63)

TL-WA801ND 300Mbps Wireless N Access Point User Guide

the Echo Reply message returned by the destination. However, some gateways do not

return Time Exceeded messages for packets with expired TTL values and are invisible to

the traceroute tool. In this case, a row of asterisks (*) is displayed for that hop.

IP Address - Enter the IP Address (such as 202.108.22.5) of the PC whose connection you wish

to diagnose.

Ping Count - Specifies the number of Echo Request messages sent. The default is 4.

Ping Packet Size - Specifies the number of data bytes to be sent. The default is 64.

Ping Timeout - Specifies the time to wait for a response in milliseconds. The default is 800.

Traceroute Max TTL - Set the maximum number of hops (max TTL to be reached) in the path to

search for the target (destination). The default is 20.

Click the Start button to start the diagnostic procedure.

The Diagnostic Results page displays the result of diagnosis.

If the result is similar to the following screen, the connectivity of the Internet is fine.

Figure 4-32 Diagnostic Results

)

Note:

1 Only one user can use this tool at one time.

2 Options “Number of Pings”, “Ping Size” and “Ping Timeout” are only available for Ping

function. Option “Tracert Hops” is available only for Tracert function.

4.7.3 Firmware Upgrade

Selecting System Tools > Firmware Upgrade allows you to upgrade the latest version of

firmware for the device on the screen shown in Figure 4-33.

Figure 4-33 Firmware Upgrade

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 75 76

No comments

TP-LINK TL-WA801ND V1 User's Guide Page 63