TP-LINK TL-WR941ND User Manual download pdf (Page 63)

TL-WR941N/TL-WR941ND Wireless N Router

- 58 -

Click the Refresh button to refresh the logs.

Click the Clear All button to clear all the logs.

4.12.8 Remote Management

Choose menu “System Tools → Remote Management”, you can configure the Remote

Management function on this screen (shown in Figure 4-49). This feature allows you to manage

your Router from a remote location via the Internet.

Figure 4-49 Remote Management

¾ Web Management Port - The port number used to access the router. This router’s

default remote management web port number is 80. For greater security, you’d better

change the remote management web interface to a custom port by entering that number in

the box provided. Choose a number between 1024 and 65534, but do not use the number of

any common service port.

¾ Remote Management IP Address - This is the current address you will use when

accessing your router from the Internet. The default IP address is 0.0.0.0. It means this

function is disabled. To enable this function, change the default IP address to another IP

address as desired.

)

Note:

1) To access the router, you will type your router's WAN IP address into your browser's

address (in IE) or Location (in Navigator) box, followed by a colon and the custom port

number. For example, if your Router's WAN address is 202.96.12.8, and the port number

you use is 8080, please enter http://202.96.12.8:8080

in your browser. Later, you may be

asked for the router's password. After successfully entering the username and password,

you will be able to access the router's web-based utility.

2) Be sure to change the router's default password to a very secure password.

4.12.9 Statistics

Choose menu “System Tools→Statistics”, you can view the statistics of the Router, including

total traffic and current traffic of the last “Packets Statistic interval” seconds.

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 75 76

No comments

TP-LINK TL-WR941ND User Manual Page 63