TP-LINK TL-WR941ND User Manual download pdf (Page 35)

TL-WR941N/TL-WR941ND Wireless N Router

- 30 -

• WEP Key settings - Select which of the four keys will be used and enter the matching WEP

key that you create. Make sure these values are identical on all wireless stations in your

network.

• Key Type - You can select the WEP key length (64-bit, or 128-bit, or 152-bit.) for

encryption. "Disabled" means this WEP key entry is invalid.

64-bit -

You can enter 10 hexadecimal digits (any combination of 0-9, a-f, A-F, zero key is

not promoted) or 5 ASCII characters.

128-bit - You can enter 26 hexadecimal digits (any combination of 0-9, a-f, A-F, zero key is

not promoted) or 13 ASCII characters.

152-bit - You can enter 32 hexadecimal digits (any combination of 0-9, a-f, A-F, zero key is

not promoted) or 16 ASCII characters.

)

Note:

If you do not set the key, the wireless security function is still disabled even if you have selected

Shared Key as Authentication Type.

¾ WPA /WPA2 - It’s based on Radius Server.

• Version - you can choose the version of the WPA security on the pull-down list. The default

setting is Automatic, which can select

WPA (Wi-Fi Protected Access) or WPA2 (WPA

version 2) automatically based on the wireless station's capability and request.

• Encryption - You can select either Automatic, or TKIP or AES.

• Radius Server IP - Enter the IP address of the Radius Server.

• Radius Port - Enter the port that radius service used.

• Radius Password - Enter the password for the Radius Server.

• Group Key Update Period - Specify the group key update interval in seconds. The value

should be 30 or above. Enter 0 to disable the update.

¾ WPA-PSK/WPA2-PSK-It’s the WPA/WPA2 authentication type based on pre-shared

passphrase.

• Version - you can choose the version of the WPA-PSK security on the dropl-down list. The

default setting is Automatic, which can select

WPA-PSK (Pre-shared key of WPA) or

WPA2-PSK (Pre-shared key of WPA) automatically based on the wireless station's

capability and request.

• Encryption - When WPA-PSK or WPA is set as the Authentication Type, you can select

either Automatic, or TKIP or AES as Encryption.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 75 76

No comments

TP-LINK TL-WR941ND User Manual Page 35