TP-LINK TL-WR941ND Specifications download pdf (Page 67)

300Mbps Wireless N Router TL-WR940N/TL-WR941ND

-59-

Figure 4-41 Remote Management

Web Management Port - Web browser access normally uses the standard HTTP service

port 80. This router's default remote management web port number is 80. For greater security,

you can change the remote management web port to a custom port by entering that number

in the box provided. Choose a number between 1 and 65534 but do not use the number of

any common service port.

¾ Remote Management IP Address - This is the current address you will use when accessing

your router from the Internet. This function is disabled when the IP address is set to the

default value of 0.0.0.0. To enable this function change 0.0.0.0 to a valid IP address. If set to

255.255.255.255, then all the hosts can access the router from internet.

)

Note:

1. To access the router, you should type your router's WAN IP address into your browser's

address (in IE) or Location (in Navigator) box, followed by a colon and the custom port

number. For example, if your router's WAN address is 202.96.12.8, and the port number

used is 8080, please enter http://202.96.12.8:8080 in your browser. Later, you may be

asked for the router's password. After successfully entering the username and password,

you will be able to access the router's web-based utility.

2. Be sure to change the router's default password to a very secure password.

4.10 Parental Control

Choose menu “Parental Control”, and you can configure the parental control in the screen as

shown in Figure 4-42. The Parental Control function can be used to control the internet activities

of the child, limit the child to access certain websites and restrict the time of surfing.

1 2 ... 62 63 64 65 66 67 68 69 70 71 72 ... 110 111

No comments

TP-LINK TL-WR941ND Specifications Page 67