TP-LINK ARCHER D7 User's Guide download pdf (Page 40)

Archer D7 AC1750 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide



Note:

After you finish the Internet configuration, please click Save to make the settings take effect.

4.5.2 Interface Grouping

Choose “Network”“Interface Grouping”, you can view all the current groups on this page

(shown in Figure 4-11).

Figure 4-11

 Enable the Virtual LAN Ports feature: Virtual LAN (VLAN) is a group of devices on one or

more LANs that are configured so that they can communicate as if they were attached to the

same LAN. Because VLANs are based on logical instead of physical connections, it is very

flexible for user/host management, bandwidth allocation and resource optimization. If you

want to active Interface Grouping function, please check the box to enable the Virtual LAN

Ports feature.



Note:

It is not allowed to disable the VLAN with Ethernet Connection enabled.

To support this feature, you must create mapping groups with appropriate LAN and WAN

interfaces using the Add button. The Remove button will remove the grouping and add the

ungrouped interfaces to the Default group. Only the default group has IP interface.

Click the Add button. You can add a new interface group in the next screen. For example, you

want LAN1 and LAN3 to be a group called Group 1 over br_8_35_0 WAN interface, you can refer

to the following figure.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 123 124

No comments

TP-LINK ARCHER D7 User's Guide Page 40