TP-LINK ARCHER D7 User's Guide download pdf (Page 106)

Archer D7 AC1750 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide

4.19 Bandwidth Control

Choose menu “Bandwidth Control”, and then you can configure the Upstream Bandwidth and

Downstream Bandwidth in the next screen. The values you configure should be less than

1000000Kbps. For optimal control of the bandwidth, please select the right Line Type and ask your

ISP for the total bandwidth of the egress and ingress.

Figure 4-99

 Enable Bandwidth Control: Check this box so that the Bandwidth Control settings can take

effect.

 Total Upstream Bandwidth: The upload speed through the WAN port

 Total Downstream Bandwidth: The download speed through the WAN port.

 Description: This is the information about the rules such as address range.

 Priority: Priority of Bandwidth Control rules. ‘1’ stands for the highest priority while ‘8’ stands

for the lowest priority. The total Upstream/ Downstream Bandwidth is first allocated to

guarantee all the Min Rate of Bandwidth Control rules. If there is any bandwidth left, it is first

allocated to the rule with the highest priority, then to the rule with the second highest priority,

and so on.

 Upstream bandwidth: This field displays the max and min upload bandwidth through the

WAN port, the default is 0.

 Downstream bandwidth: This field displays the max and min download bandwidth through

the WAN port, the default is 0.

 Status: The status of this rule either Enabled or Disabled.

 Edit: Click Edit to modify the rule.

To add/modify a Bandwidth Control rule, follow the steps below.

1. Click Add New shown in

Figure 4-99, you will see a new screen shown in Figure 4-100.

2. Enter the information as the screen shown below.

1 2 ... 101 102 103 104 105 106 107 108 109 110 111 ... 123 124

No comments

TP-LINK ARCHER D7 User's Guide Page 106