TP-LINK TD-8816 User Manual download pdf (Page 9)

TD-8816 ADSL2/2+ Ethernet Router User Guide

Chapter 2. Hardware Installation

2.1 The Front Panel

Figure 2-1

The LEDs locate on the front panel, which indicate the device’s working status. For details, please

refer to LED Explanation.

LED Explanation:

LED Status Indication

On There is a successful connection on LAN port but no activity

Flash Data is being transferred over the LAN connection

LAN

Off

There is no connection on LAN port or the connection is

abnormal

On The LINE port is linked up

Flash The ADSL Router is training

ADSL

Off The LINE port is linked down

On A successful PPP connection has been established

Flash Data is being transferred over the Internet

Internet

Off

There is no successful PPP connection or the Router works on

Bridge mode

On Power is OK

Power

Off Power is failed

2.2 The Back Panel

Figure 2-2

¾ On/OFF: The switch for the power.

¾ POWER: The Power plug is where you will connect the power adapter.

¾ RESET: There are two ways to reset the Router's factory defaults.

Method one: With the Router powered on, use a pin to press and hold the Reset button

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 54 55

No comments

TP-LINK TD-8816 User Manual Page 9