TP-LINK TL-WR1043ND Specifications download pdf (Page 46)

TL-WR1043ND 300Mbps Wireless N Gigabit Router

Figure 4-18 Wireless Security

¾ Disable Security - If you do not want to use wireless security, check this radio button. But it’s

strongly recommended to choose one of the following modes to enable security.

¾ WPA/WPA2-Personal - It’s the WPA/WPA2 authentication type based on pre-shared

passphrase. The router is configured by this security type by default.

• Version - you can choose the version of the WPA-PSK security on the drop-down list. The

default setting is Automatic, which can select

WPA-PSK (Pre-shared key of WPA) or

WPA2-PSK (Pre-shared key of WPA) automatically based on the wireless station's

capability and request.

• Encryption - When WPA-PSK or WPA is set as the Authentication Type, you can select

either Automatic, or TKIP or AES as Encryption.

)

Note:

If you check the WPA/WPA2-Personal radio button and choose TKIP encryption, you will

find a notice in red as shown in Figure 4-19.

-37-

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 121 122

No comments

TP-LINK TL-WR1043ND Specifications Page 46