TP-LINK TL-WR542G User Manual download pdf (Page 9)

TL-WR542G 54M Wireless Router User Guide

- 8 -

2.3.2 The Rear Panel

The Rear panel contains the following features. (Viewed from left to right:)

• Wireless antenna

• Factory Default Reset button

There are two ways to reset the Router's factory defaults:

1. Use the Factory Defaults function on System Tools -> Factory Defaults page in the

Router's Web-based Utility.

2. Use the Factory Default Reset button: First, turn off the Router's power. Second, press

and hold the default reset button then turn on the Router's power, until the system LED

light up (about 3 seconds). Last, release the reset button and wait for the router to reboot.

Note: Ensure the Router is powered on before it restarts completely

• WAN RJ45 port for connecting the Router to a cable or DSL modem

• Four LAN 10/100Mbps RJ45 ports for connecting the Router to the local PCs

• AC power socket: only use the Power adapter supplied with the TL-WR542G

54Mbps Wireless Router, use of a different adapter may result in product

damage.

1WAN 234

RESET

Figure 2-2: Rear Panel sketch

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 68 69

No comments

TP-LINK TL-WR542G User Manual Page 9