TP-LINK TD-8817 User Manual download pdf (Page 34)

TD-8817 ADSL2/2+ Ethernet/USB Router User Guide

4.4.3.3. IP Address Mapping

Choose “Advanced Setup→NAT”, select Multiple in Number of IPs. Click IP Address Mapping,

then you can configure the Address Mapping Rule in Figure 4-20. The IP Address Mapping is for

those VCs that configured with multiple IPs. The IP Address Mapping rule is per-VC based (only

for Multiple IPs' VCs).

Figure 4-19

Figure 4-20

¾ Rule Index: Select the Address Mapping Rule index for this VC. You can specify 8 rules in

maximum.

¾ Rule Type: There are four types, one-to-one, Many-to-One, Many-to-Many Overload and

Many-to-Many No-overload.

¾ Local Start & End IP: Enter the local IP Address you plan to mapped to. Local Start IP is the

starting local IP address and Local End IP is the ending local IP address. If the rule is for all

local IPs, then the Start IP is 0.0.0.0 and the End IP is 255.255.255.255.

¾ Public Start & End IP: Enter the public IP Address you want to do NAT. Public Start IP is the

starting public IP address and Public End IP is the ending public IP address. If you have a

dynamic IP, enter 0.0.0.0 as the Public Start IP.

¾ Address Mapping List: This displays the information about the Mapping addresses.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 57 58

No comments

TP-LINK TD-8817 User Manual Page 34