TP-LINK TL-SG2210P User's Guide Page 15

  • Download
  • Add to my manuals
  • Print
  • Page
    / 188
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 14
The followin
g parts are located on the front panel of TL-SG2210P:
Reset: Press this button for five seconds or above to reset the software setting back to factory
default setting.
LEDs
Name Status Indication
On(Green) The switch is powered on.
Power
Flashing/Off The switch is powered off or power supply is abnormal.
Flashing The switch is working normally.
System
On/Off
The switch is working abnormally.
On
A 1000Mbps device is connected to the corresponding
port, but no activity.
Green
Flashing Data is being transmitted or received.
On
A 10/100Mbps device is connected to the
corresponding port, but no activity.
Yellow
Flashing Data is being transmitted or received.
Link/Act
(Port 1-8)
Off No device is connected to the corresponding port.
On(Green)
An SFP transceiver is connected to the corresponding
port, and it is connected to a device, but no activity.
Flashing
A 1000Mbps device is connected to the corresponding
port and transmitting data.
SPF1, SFP2
Off
A 10/100Mbps device or no device is connected to the
corresponding port.
On(Green)
The corresponding port is connected to a PoE PD and
supplying power.
Flashing
The PoE power circuit is overloaded or in short.
PoE Status
(Port 1-8)
Off
No PD is connected to the corresponding port, or no
power is supplied.
On(Red)
Total power supply is >=46W but <53W.
Flashing
Total power supply is >=53W.
PoE Max
Off
Total power supply is <46W.
The front panel of TL-SG2216 is shown as Figure 2-2.
Figure 2-2 Front Panel of TL-SG2216
7
Page view 14
1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 187 188

Comments to this Manuals

No comments