TP-LINK TL-POE150S V3 User's Guide download pdf (Page 8)

Chapter 3 Connecting the PoE Injector

You can use TL-POE150S PoE Injector with PD or PoE Splitter

to expand your network to where there are no power lines or

outlets, where you wish to fix devices such as APs, IP Cameras

or IP Phones, etc. The following steps will tell you how to

connect the PoE Injector correctly.

1. Use a CAT5 UTP cable to connect port of Ethernet device

(such as a switch, hub or router) to the LAN IN port.

2. Please connect the power adapter properly to a power

socket with provided power cable, and then connect the

other end of the power adapter to the DC 48V port of the

TL-POE150S.

3. Connect the POWER+DATA OUT port of the TL-POE150S

to a PD or a PoE Splitter with CAT 5 UTP cable.

Now, the device can work normally with data and power.

LAN IN: Connect to a

network device (such as a

Switch or Router ) with

CAT5 UTP cable.

DC 48

: Connect to the

provided power adapte

which can supply steady

ower of 48V DC.

PWR: Power LED. A steady blend color of red and yellow

indicates that

the power adapter is working properly. A steady

green light indicates that

the PoE system has detected the

PD or PoE Splitter and the PoE Injector is supplying powe

normally. A flashing light indicates abnormal power supply

1 2 3 4 5 6 7 8 9 10

No comments

TP-LINK TL-POE150S V3 User's Guide Page 8