TP-LINK TL-WA890 Specifications download pdf (Page 18)

TL-WA890EA

N600 Universal Dual Band WiFi Entertainment Adapter with 4 Ports

 Main Router/AP Wi-Fi Network Name - It shows the name of the wireless network your

device has connected to, also called SSID.

 MAC Address of Main Router/AP - It shows the physical MAC address of the Main

Router/AP your device has connected to, also called BSSID.

 Channel - The wireless channel in current use.

 Signal - It shows the strength of the root wireless network signal that the device has

received.

 Band - The wireless band that this device is working in.

 MAC Address - The physical address of the device, as seen from the Advanced -> LAN

page.

 Wired - As follows is the information of Wired LAN. You can configure them in the Advanced

-> LAN page.

 MAC Address - The physical address of the device, as seen from the Advanced -> LAN

page.

 IP Address - The LAN IP address of the device.

 Subnet Mask - The subnet mask associated with LAN IP address.

 System Up Time - The duration since the device was powered on or reset.

Click the Refresh button to get the latest status and settings of the device.

4.2 Quick Setup

Please refer to Chapter 3 Quick Installation Guide.

4.3 WPS

WPS (Wi-Fi Protected Setup) can help you to quickly and securely connect to a network. This

section will guide you to add a new wireless device to an existing network quickly by WPS function.

The WPS function can be configured on the page as shown in Figure 4-2.

Figure 4-2 WPS

 WPS Status - To enable or disable the WPS function here.

If the root device (a wireless router or an access point) supports WPS and is equipped with a WPS

button, the following 3 methods are all available. While if the root device supports WPS but doesn't

have a WPS button, only the 3rd one is available.

Method 1:

1) Push the WPS button on the root device.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 35 36

No comments

TP-LINK TL-WA890 Specifications Page 18