TP-LINK TL-PA4020P User Manual download pdf (Page 9)

TL-PA4020P AV500 2-port Powerline Adapter with AC Pass Through

8. Plug this product directly into a wall socket (100V–240V~, 50/60Hz). Do not use an extension cord

between this product and the AC power source.

9. When plugging this product into a wall socket, make sure that the electrical socket is not damaged,

and that there is no gas leakage.

10. Place the connecting cables properly so that people won’t stumble or walk on it.

11. This product should be operated from the type of power indicated on the marking label. If you are not

sure of the type of power available, consult the qualified technician.

12. Unplug this product from the mains and refer the product to qualified service personnel for the

following conditions:

¾ If liquid has been spilled on the product

¾ If the product has been exposed to rain or water

13. Unplug this product from the wall socket before cleaning. Use a damp cloth for cleaning. Do not use

liquid cleaners or aerosol cleaners.

14. The specification of the fuse is T4AL250V. To avoid damage, please do not change the fuse.

15. The Operating temperature is 0 ~4℃ 0 (32~10℃℉4)℉ .

16. The Storage temperature is -40 ~70℃℃ (-40 ~158 )℉℉.

1.3 LED Indicator

The LED indicator displays information about the device’s status.

Item Status Indication

Solid The adapter is on.

Blinking

The adapter is in power-saving mode or in pairing

procedure.

Power LED

Off The adapter is off.

Solid The adapter is connected to a powerline network.

Blinking

The adapter is transferring data.

Powerline LED

Off

The adapter isn’t connected to any powerline network or

is in power-saving mode.*

Power LED

Powerline LED

Ethernet LED

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 27 28

No comments

TP-LINK TL-PA4020P User Manual Page 9