TP-LINK TL-PA4020 KIT Specifications download pdf (Page 28)

TL-PA4020

AV500 2-port Powerline Adapter

Appendix A: Troubleshooting

The Troubleshooting provides answers to common problems regarding the Powerline Adapter.

1. The Power LED does not light up.

Ans. Check the following:

1. Make sure that the Powerline Adapter is properly plugged into a power outlet.

2. Make sure the power outlet is active (working) by plugging another electric device into it.

3. Re-plug the Powerline Adapter to the power outlet. If the Power LED is still failed to light up,

contact your local dealer for technical support.

2. The Ethernet LED does not light up.

Ans. Check the following:

1. Make sure that the Ethernet cable (RJ45) is properly connected to the Powerline Adapter’s

Ethernet port.

2. Make sure that the other end of the Ethernet cable (RJ45) is properly connected to the computer

LAN card or to your Cable/xDSL Ethernet port.

3. Make sure your computer LAN card is properly installed and configured.

4. Make sure your Cable/xDSL broadband access is working and configured correctly.

5. Contact your local dealer for technical support if the Ethernet LED is still failed to light up after

the above procedures.

3. The Powerline LED does not light up.

Ans. Check the following:

1. Double click to enable the Management Utility and click the “Rescan” button under the

Network configuration homepage. The Management Utility will automatically detect all other

Powerline Adapters on your powerline network.

2. Try to plug a second Powerline Adapter into a nearby power outlet and check whether the

Powerline LED lights up or not.

3. Contact your local dealer for technical support if the Powerline LED is still failed to light up after

the above procedures.

1 2 ... 23 24 25 26 27 28

No comments

TP-LINK TL-PA4020 KIT Specifications Page 28