TP-LINK AV200 Specifications download pdf (Page 10)

TL-PA2030 AV200 3-port Mini Powerline Adapter

Chapter 2 Connecting Mechanism

2.1 Introduction

The Powerline Adapter supports up to 200Mbps data rate. With this high speed connection rate, this

Powerline Adapter allows you to setup a high speed home network by using your home existing

electrical wiring. Simply plug this Powerline Adapter into an ordinary power outlet to extend your

Cable/xDSL broadband connection or existing LAN network to any other electrical outlet in any rooms of

your house.

Note that this Powerline Adapter works in pairs. You need to plug one Powerline Adapter into a power

outlet for each computer (Connect to the computer LAN card) you want to connect (Network access);

you will also need another Powerline Adapter connected to your Cable/xDSL broadband (Ethernet port)

in order to extend your broadband connection or Internet surfing. With clean powerline, the distance

between two Powerline Adapters can reach 300 meters at lease, but the actual distance may vary due

to the environment.

Section below describes the Powerline Adapter’s LED indicators, physical interface and hardware

connection mechanism.

2.2 LED Indicator

The LED indicator displays information about the device’s status.

Item Status Indication

On The adapter is on.

Blinking The adapter is in pairing procedure.

Power LED

Off The adapter is off.

On The adapter is connected to a powerline network.

Blinking The adapter is transferring data.

Powerline LED

Off The adapter isn’t connected to any powerline network.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 26 27

No comments

TP-LINK AV200 Specifications Page 10