TP-LINK TL-WA730RE Specifications download pdf (Page 13)

TL-WA730RE 150Mbps Wireless Range Extender User Guide

1.3.2 The Rear Panel

Figure 1-2

Viewed from left to right, the following parts are located on the rear panel of TL-WA730RE.

POWER: The power port connects to the power adapter provided with the TL-WA730RE 150Mbps

Wireless Range Extender.

LAN: One LAN 10/100Mbps RJ45 port connects to a network device, such as a switch or a router.

RESET: The Reset button is used to restore the AP’s factory default settings. There are two ways

to reset the Access Point’s factory defaults:

z Method one: With the AP powered on, use a pin to press and hold the Reset button (about 5

seconds) until the System LED becomes quick-flash from slow-flash. And then release the

button and wait the router to reboot to its factory default settings.

z Method two: Restore the default settings from “System Tools > Factory Defaults” of the

Modem's Web-based management page.

Wireless antenna: The external antenna is used to transmit and receive wireless data.

)

Note:

Ensure the Range Extender is powered on before it restarts completely.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 63 64

No comments

TP-LINK TL-WA730RE Specifications Page 13