Tp-link TL-WN551G User Manual download pdf (Page 17)

TL-WN510G/TL-WN550G/TL-WN551G 54M Wireless Adapter User Guide

to start an Ad Hoc network if no matching network name is found after scanning all

available modes. This mode also allows the selection of the channel the wireless

adapter uses. The channels available depend on the regulatory domain. If the

adapter finds no other ad hoc adapters, the channel that the adapter starts the ad hoc

network with will be selected automatically. The wireless adapter must match the

wireless mode and channel of the clients it associates.

 802.11 Authentication Mode: Select which mode the wireless adapter uses to

authenticate to an access point:

• Automatic causes the adapter to attempt authentication using shared, but switches it to open

authentication if shared fails.

• Open System enables an adapter to attempt authentication regardless of its WEP settings. It

will only associate with the access point if the WEP keys on both the adapter and the access

point match.

• Shared-key only allows the adapter to associate with access points that have the same WEP

key.

For infrastructure (access point) networks, click Preferred APs… to specify up to four

access points to the client adapter that attempts to be associated to the access points.

Figure 3-7 Advanced tab of Profile Management

3.2.2 Remove a profile

1. Go to the Profile Management tab.

2. Select the profile name to remove in the Profiles List.

3. Click Remove.

3.2.3 Switch another Profile

1. Go to the Profile Management tab.

2. Click on the profile name in the Profiles List.

3. Click Activate.

3.2.4 Import a Profile

1. From the Profile Management tab, click Import…. The Import Profile will then appear.

- 14 -

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 26 27

No comments

Tp-link TL-WN551G User Manual Page 17