TP-LINK RE210 Specifications download pdf (Page 22)

RE210

AC750 WiFi Range Extender User Guide

4.3.1 LAN

Selecting Network > LAN will enable you to configure the IP parameters of Network on this page.

Figure 4-3 LAN – Dynamic IP

Figure 4-4 LAN – Static IP

 MAC Address - The physical address of the LAN port, as seen from the LAN. The value

cannot be changed.

 Type - Several IP types are supported, including: (1) Dynamic IP; (2) Static IP, and they are

explained below.

 Dynamic IP - In this type, if your range extender have connected to a router, your client

will dynamically get a IP Address / Gateway from the router, otherwise the client will get a

IP Address / Gateway in the same network as you set below. And this type is

recommended.

 Static IP - In this type, you can configure IP Address / Gateway manually.

 IP Address - Enter the IP address of your Range Extender in dotted-decimal notation (factory

default setting is 192.168.0.254).

 Subnet Mask - An address code that determines the size of the network. Normally use

255.255.255.0 as the subnet mask.

 Gateway - The gateway should be in the same subnet as your IP address.



Note:

1. The IP parameters cannot be configured if you have chosen Dynamic IP. In this situation the

device will automatically configure the IP parameters appropriate to your need.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 40 41

No comments

TP-LINK RE210 Specifications Page 22